H2ProDrive Installation

H2ProDrive Installation 2017-08-10T12:34:30+00:00

The following Instruction videos will walk you through the installation and Setup of the H2ProDrive on the Frontier 12 and Pursuit.  All videos pertain to both models except #4 & #6, these have a model specific video.

Tools need for installation are:

  • 7/16 wrench
  • 5/8 wrench
  • Drill w/ Phillips Bit
  • #4 Hex key
  • Mallet

If you have any questions or issues with installation, give us a call at 360.543.9019.

1.  Intro & Pedal Tower Setup

2.  Install Prop Shaft

3. Connect Drive Cable

4.  Install Steering Control (FRONTIER 12)

4.  Install Steering Control – PURSUIT

5.  Position Pedal Tower

6.  Install Retract Cord – FRONTIER

6.  Install Retract Cord – PURSUIT

7.  Ready for the Water + Tips