The following Instruction videos will walk you through the installation and Setup of the H2ProDrive on the Frontier 12 and Pursuit. All videos pertain to both models except #4 & #6, these have a model specific video.

Tools need for installation are:

7/16 wrench
5/8 wrench
Drill w/ Phillips Bit
#4 Hex key
Mallet

If you have any questions or issues with installation, give us a call at 360.543.9019.

1. Intro & Pedal Tower Setup

2. Install Prop Shaft

3. Connect Drive Cable

4. Install Steering Control (FRONTIER 12)

4. Install Steering Control – PURSUIT

5. Position Pedal Tower

6. Install Retract Cord – FRONTIER

6. Install Retract Cord – PURSUIT

7. Ready for the Water + Tips